könnte mir jemand bitte die genauen Unterschiede der verschiedenen Primers erklären ?
Federal 100/200/GM100M/GM200M
was mich interessiert sind Wandstärke, Zündverhalten, Zündsicherheit
![Reloading Smiley reload-smile](./images/smilies/wiederladen.gif)
durchmesser und ladungDesertEagleCal50 hat geschrieben: ↑Do 9. Feb 2023, 08:23Hallo,
könnte mir jemand bitte die genauen Unterschiede der verschiedenen Primers erklären ?
Federal 100/200/GM100M/GM200M
![]()
wo?ASCO hat geschrieben: ↑Do 9. Feb 2023, 09:15Steht doch da, https://www.federalpremium.com/reloading/primers/
Ladung(priming compound) beim Magnum ist höher, hat das was mit der Pulvermenge oder Freiraum zu tun?
Since magnum primers burn hotter and longer than standard primers, they can create max loads that are dangerous to the barrel and the shooter. They can ignite faster powders too quickly and can cause a dangerous pressure buildup. This also means, however, that magnum primers are much better at igniting ball powders than standard large rifle primers.
Another big difference is in the low-temperature performance. If the primer is going to be used to fire in very cold conditions or other situations where ball powder becomes harder to ignite, choosing to use a magnum instead of a standard can be advantageous, provided it doesn't create a compressed load greater than the maximum loads recommended in the reloading manual. This allows magnum primers to be used down to 20 degrees F.
staerker
danke!
keine ahnungDesertEagleCal50 hat geschrieben: ↑Do 9. Feb 2023, 12:51danke!
wenn ich eine Standardlabo, Sig X6 115gr, 3,9g VVN320 mit SP Magnum zünde, hab ich da ein Problem, oder bleibt das im Rahmen?
sagt keiner, dass man das anders machen soll und das ist nicht die Frage!
Mach fünf, sechs und schicks ans Beschussamt.DesertEagleCal50 hat geschrieben: ↑Do 9. Feb 2023, 12:51danke!
wenn ich eine Standardlabo, Sig X6 115gr, 3,9g VVN320 mit SP Magnum zünde, hab ich da ein Problem, oder bleibt das im Rahmen?