DerDaniel hat geschrieben:Jagasep hat geschrieben:Die EOTech Probleme dürften mind. 99% der " Seals" hier, sowieso nicht betreffen, [...]
Einspruch!!!
Die Abweichungen entstehen bei Temperaturschwankungen, es gab nie eine Angabe dass sie erst ab x° auftreten, sondern bei -40°/120° 4 MOA betragen. Des weiteren wurde eine Parallaxenfehler abhängig von der Temperatur festgestellt, ebenfalls ohne "erst ab"-Angabe. Insofern muss man davon ausgehen, dass es bei jeder (noch so kleinen) Temperaturschwankung zu Fehlern kommt.
Und 50°C bzw. -10° hast du an deiner Optik schnell, wenn du bisal im Sommer unter freiem Himmel bzw. im Winter auf einer Freiluftbahn schießt/pause machst. Das matte Schwarz absorbiert/emittiert Wärmestrahlung sehr gut.
 
Thermal Drift - After zeroing the ECOS systems at or near ambient temperature (73°F), the zero position 
will shift during operating temperature changes. The ECOS systems have the potential to shift 
approximately +/- 4 Minutes of Angle (MOA) at -40°F and 122°F. Due to thermal drift, the sight may not 
return to zero. The systems have the potential of approximately a +/- 2 MOA zero shift upon return to 
ambient (73°F) after being exposed to any temperature between -40°F and 122°F temperatures. Impact 
to the operators is the sight zero will be affected at varying operating temperatures.
Safe Use
The ECOS systems sight zero position should be verified and adjusted accordingly during and after 
exposure to temperature extremes.
Mehr Infos hier...
http://www.eotechinc.com/hws-service-an ... leshooting 
			
									
									9x19 | 357 Mag. | 44 Mag. | 223 Rem. | 308 Win. | 7,62x54R | 8x57JS | 338 Lapua Magnum | 45-70 Govt. | Kal. 12
*** Suche schönes Bajonett für Perser Mauser inkl. Scheide ***